Description
Frequently Asked Questions
Ask a Question-
+ Show Answer
how do I know what size to order. My board is a Hobie 9 ft long. its very light and does not have the fin screwed in Its a signed board
A typical 9'ft Hobie board would likely be a surfboard. For this the standard 'Surfboard 4"' version would be suitable.
However, if it is a Stand Up Paddleboard (typically these are thicker than 5 inches and would have a width of 25+") then the SUP - 6" version would be recommended.
If you're still unsure or would like a second opinion please email us a picture. We'd be happy to check it out!: info@epicsurfracks.com
-
+ Show Answer
This rack comes as a pair correct? Not stated anywhere in the documentation.
Yes, that's correct this rack comes as a set.
-
I just inherited a 9ft surfboard that I would like to display horizontally in our entryway. I would like it fairly close to the ceiling… So I am not sure if I should get the standard acrylic hanging racks or the angled down hanging racks. Can you please advise on the difference? Additionally, if we decide to hang it vertically, would those racks also need to be installed at the studs? I have included a photo of the board for reference.+ Show Answer
If you’re planning to mount the board close to the ceiling, I’d actually recommend the angled-down version. With the traditional flat (parallel-to-the-wall) rack, you’ll generally need enough clearance above the rack to maneuver the board in and out after installation—essentially requiring at least the width of the board to clear the rack.
The angled-down version allows for much tighter tolerances and makes it easier to install and remove the board when mounting close to the ceiling.
As for vertical storage (or the other acrylic-based racks), we generally recommend mounting into studs whenever safely possible. While the board itself isn’t particularly heavy, studs provide the most secure installation and are always preferred over drywall anchors alone.
-
Hello! I'm an interior designer in Charleston, SC decorating a beach home for my client. We'd like to use the Clear Surfboard or SUP Wall Rack product for our project and are installing blocking behind the drywall currently. Can you tell me how far apart I should place these mounts for a 6' board?+ Show AnswerRegarding spacing of where to align the racks with the board can vary depending on the shape and rocker of the actual surfboard. With that being said a good rule of thumb is around ~1/3 in from each end point of the surfboard.The real priority here is mounting the surfboard rack directly to the studs in the wall as this will provide the most rigidity/stability. Determining where the client wants the board located in the room in question, finding the respective studs for this location, and then making sure the surf racks are spaced out enough so that the board will not teeter would be a good order of operations.One thing to note: Most of the time we want the surfboard exactly level to the floor and not the racks themselves (often determined by the surfboard stringer, or wooden line in the middle of the board, on most, but not all surfboards). So, with taking the surfboard shape and outline into consideration you may find that the racks themselves will not be level with the floor, as the surfboard shape will determine where the racks need to be installed in the vertical orientation.Laying the board and racks out on the floor prior to installation should help get an understanding of how to vertically align the racks on the wall.As far as blocking: I would refrain from mounting the racks directly to the blocking itself. Although, it may provide enough stability, the rack was not really designed for this, but rather to be mounted directly center to the vertical (load bearing) studs.
-
How do you put the surfboard in the rack once it is mounted? Or does someone need to hold the board while the rack is being screwed to the wall ? The wall we want to mount our board to is a standard 8 foot ceiling so not something we could "drop" the board into....???+ Show Answer
You'd want to mount the rack to the wall securely first, before trying to put the board in the rack.
If you're trying to mount the board upwards and close to the ceiling and fear that there might not be enough extra head-room for the board to clear getting into the rack, then I'd suggest going with our Angled Down | Clear Acrylic version of this rack. This rack should give more of an angle, allowing the surfboard, or longboard to get into tight upper spaces.
Customer Reviews
This is my 1962, 9’ Jacob’s signed by Hap Jacobs himself after I had it restored.
I’ve had this board & was actively riding it in the 80’s before I decided to restore it. I’ve hung it on display in 7 different houses throughout its lifetime & these are the best looking racks by far!!!
Thanks for making such a classy product for this work of art!!
Awesome quality racks. Very impressed. Will recommend/buy again happily. Thanks!
Clear Surfboard or SUP Wall Rack | Flat to Wall | Trophy Style
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.