Description
Unsure on mount type? Read below 😊
These high quality e-bike surf racks will safely transport Surfboards, Wakeboards, Longboards, or Stand Up Paddle boards. The optional SUP arms can even be used to hold 2 surfboards at once.
E-Bikes come in a variety of shapes, sizes, and geometries so fitting the proper surf rack to yours is paramount to successful adventuring. Our e-bike racks come in 3 separate mount variations to accommodate the various e-bikes on the market.
Here is a simple guide in helping decide which of the 3 mount-options is best for you:
1. Shortboards (Single Mount - Vertical Tubes):
If you have a traditional single seat post, and just trying to carry a shortboard this is the rack for you! The single mount point quickly and easily installs to one vertical tube (like a typical vertical seat-post found on most bicycles.)
2. Longboards & SUP (U-Bolt & Frame Mount+):
This rack is great for those that have e-bikes with thinner round or flat-plate luggage racks. It's also the rack to pick if your bikes has frame mounts - screws placed by the bike manufacturer that bolt up directly to the frame, and are typically found on the front or rear of the frame, sometimes in sets of 4. These are often placed on e-bikes to allow a variety of accessories to be mounted.
This rack has 2 separate mount-points that can be installed close together or mounted on the front and rear of the bike (mounting as spread out as possible to the front and rear of the bike is recommended for transporting multiple shortboards, or larger boards like longboards, guns, and SUP Stand Up Paddle boards.)
Included mounting options:
- 3 U-Bolt Sizes (3.5", 4.0", and 8.0" Lengths) for Front Tube/Frame Mounts
- Single Tube Seat Post Mount
- Pair of C-Clamps (for .25" Round or Flat Surface Luggage Racks)
3. Longboards & SUP (Dual C-Clamp Mounts):
This is the same rack as our popular Surfboard Moped Rack | Dual-Mount. The rack features dual c-clamps for mounting directly to parallel round tubes (like fitting to heavier duty luggage racks) or e-bikes that have a bike frame that splits into 2 parallel tubes (which confusingly enough are often intended to function as a luggage rack by the e-bike manufacturer.)
This rack has 2 separate mount-points that can be installed close together or mounted on the front and rear of the bike (mounting as spread out as possible to the front and rear of the bike is recommended for transporting multiple shortboards, or larger boards like longboards, guns, and SUP Stand Up Paddle boards.)
Included mounting options (2 pairs of each):
- Small C-Clamp: 0.25" - 0.5" (6mm-13mm)
- Medium
- C-Clamp: 0.5" - 0.75" (13mm-19mm)
- Large
- C-Clamp: 0.75" - 1.0" (19mm-26mm)
SUP / 2x Shortboard Arms:
The racks above come standard with a pair of hooks that have a 4" wide bar at the bottom. Adding the SUP arms will provide an additional arm set (one that has a 6" gap at the base, meant for holding larger SUP boards or multiple shortboards (using a tie-down or bungee is recommended.) Inflatable SUP boards though snug have been reported to work fine with the SUP arms.
Confused yet? Yea we get it! It can sometimes be a pain finding the proper mounting solution for e-bikes. Email us some photos of your bike for help.
If not, read on....
Did you ever head down to the beach with your board only to realize how difficult it is to find parking? That problem can easily be solved with this innovative surfboard rack for e-bikes! With a multi-point install & quick-release system, it can secure all sizes of boards. You'll easily get in and out of your desired surf zone, whether it's to go for a quick surf-check or actually go out for a paddle. Saving yourself time will likely increase your wave count.
The handy & stable quick-release system for removing the arms is different from all other's you'll find on the market is that the quick-release attaches at the base of the mount. This avoids the need to have any excess pipes that typically "hang out" on other racks, getting in the way when not in use. Changing the quick release is with a simple push-pin and takes mere seconds to take the arms on and off.
This mobile system is compatible with a variety of e-bikes including Super 73. This rack mounts via versatile clamps that can attach to a variety of areas on the bike, making install a breeze as mounting options can vary widely from bike to bike.
The surfboard hooks are also covered in a high-quality rubber which help to prevent dings, and includes holes in-case you want to attach a bungie (sold separately.) When installed properly the bungie or tie-down helps keep the board tied down when driving down winding or rough roads.
Saving time and gas while riding eco-friendly is in style! Having to drive around aimlessly trying to find parking when you get to the local beach break or reef is not. Get rockstar parking every time! You'll be stoked on this rack, just as much as we are. Once you have one of these attached to your ride surf checks and finding parking at the beach will be so easy!
*It is recommended to mount the arms further apart (closer to the front and back of the vehicle) if you're planning on using boards over 10' for added stability.
Frequently Asked Questions
Ask a Question-
Would the longboard rack fit easily on a RadRover 6 plus bike? If yes, anything you would recommend to secure it?+ Show Answer
After taking a brief look at that model I think you will be good to go with the included mounting hardware that comes with the longboard version.
The longboard version actually includes 3 separate mount options to choose from, which helps in a variety of bike geometries and mount points. -
Will this rack work on my Rad Rover Step-thru Ebike?+ Show Answer
There appears to be a variety of RadRover Step-Thru bikes that are on the market. For most (if not all that I can see) the longboard version of this surf rack will have the requisite hardware for safely mounting to these high quality e-bikes.
There is 3 included mount options with this surf rack, to maximize compatibility. -
Will this fit a Rad Expand 5 (Rad Power Bike)?+ Show Answer
Both the shorboard (single-mount) as well as the longboard (dual-mount) versions of these racks should mount up seamlessly to the RadExpand 5 electric bike, made by Rad Power Bikes.
Also, if you were planning on just mounting to the rear of the bike (if the rear luggage rack is attached) the Surfboard Moped Rack | Dual-Mount | Holds Longboards would also work. -
Hi, was thinking about purchasing. Will this attach to a RadMini Electric Fat Bike Version 4 and be able to hold boards up to 9'6? Thanks+ Show Answer
For this board & bike combination the Longboard version of this surfboard rack is recommended. It should seamlessly bolt up depending on your particular setup of the RadMini 4. However, it's recommended that you use the luggage rack offered by Rad Power Bikes. It looks to be called the RadMini Rear Rack, but check with a Rad Power Bikes representative to confirm fitting for your particular bike.
The rear luggage rack will allow you to spread the surf rack out as much as possible across the bike (from front to rear.) This provides the greatest level of stability for that 9+ Foot long board. -
Which rack would work on a trek powerfly e-mountain bike?+ Show Answer
The easiest and most streamlined version to install on the Trek Powerfly e-bike would be the Single-mount - Vertical Tube Rack.
. -
Is this surf rack compatible with The Super73 Z Miami? If so, which of the 3 options should I choose?+ Show Answer
There are two surf rack mount options that are compatible with the Super 73 Z Miami. Deciding which is best for your needs will come down to how you want to mount the surf rack up to the bike.
Option 1: Longboards & SUP (U-Bolt & Frame Mount+)
Option 2: Longboards & SUP (Dual C-Clamp Mounts)
Further information on how these can mount up to your bike (with pictures as examples) check under the "Description" area on either of those links. There should even be some pictures of other Super 73 e-bikes in that section as well, to help give you a better idea on which option to go with. Please let us know if you have any further questions. -
HI, there! I just bought Radwagon 4 Cargo Bike. I want to purchase this rack to haul a longboard (9'6" fiberglass). Which one should I get? Thanks!+ Show Answer
For a longboard (or even SUP) the best way to mount up to that Radwagon e-bike would be with the Longboards & SUP (U-Bolt & Frame Mount+) version. This will allow you to keep the rear cargo rack free for other utility, and also provide greater stability for that longer board, by spacing the mount-points more to the front and rear of the bike.
If you have a basket mounted up front, or just want to mount the surf rack directly to that rear cargo area, then the Longboards & SUP (Dual C-Clamp Mounts) is going to be the ticket to glory; Surf quality permitting ;-) -
I have the Hurley Mini Swell, will this work for that ?+ Show Answer
The Longboards & SUP (Dual C-Clamp Mounts) version should work with the Hurley Mini-Swell.
-
Hi, I have a Hurley mini swell Electric bike I am trying to find a surfboard rack for the bike. Ie. so that I can use my bike to transport my surfboard to the beach. I wanted to see whether you have a surfboard rack that would fit this bike? Or if you know where I could find one? Any help appreciated Thanks Sam+ Show Answer
For that Hurley e-bike model I would go with our E-Bike Surfboard Rack | Longboards & SUP (Dual C-Clamp Mounts)
This rack will accommodate most surfboards if setup under the seat, and will be the most stable/secure solution.
If you were planning on going with larger longboards (10'+) or even stand up paddleboards I suggest spreading the mount points to the front and rear of the bike as much as possible. In this case it looks like your only option here would be the (U-Bolt & Frame Mount+) version. -
Will the sup rack and other mount work on a Lectric XP 3.0?+ Show Answer
The Single-Mount version should work seamlessly with the Lectric XP 3.0, bolted onto the seatpost. However, this rack is recommended for surfboards, not SUP.
The Dual-Mount (both versions: C-Clamp & U-Bolt/Frame) have adequate places to mount on the Lectric XP 3.0, and should theoretically work with both the surfboard arms that come standard, and optional SUP arms, depending how you mount on the bike.
The issue you may run into with this model bike is the bike's low center of gravity, and the size of the intended board. More specific, this low center of gravity coupled with SUP boards will result in the bottom of the board to be very close to the ground. There might not be a lot of room for turning/leaning while riding, and might even be unsafe, if not mounted correctly. This really comes down to the size/shape of the board intended to transport.
One suggestion if you plan to mount stand up paddleboards, or any larger board is to lay the board next to the bike and measure to where your intended mount points would be, and see how much ground clearance you would have when mounted.
The surf racks are pretty customizable, but the bike still might be too low to the ground. In this case I recommend getting the optional luggage racks that Lectric makes, which should provide a higher mount-point off the ground, and hopefully give adequate clearance. -
Hi, I have Rad Power Bikes RadRunner Plus e-bike. I am looking for a surfboard rack for board between 5'5" to 8' Can you please advise which rack would be best suited? Thanks+ Show Answer
That's a very common e-bike that our customers have.
If you are planning on holding only boards up to 8' I would personally just mount it with the Longboards & SUP (Dual-C Clamp mounts) version. Mounting both to mount points below the rear seat posts. There are some pictures of that model being used on a RadRunner Plus under the "Description" area here: https://epicsurfracks.com/products/e-bike-surfboard-rack-shortboard-longboard-sup?variant=41158972604621
If you are planning on using a larger longboard I would recommend mounting to the front and back of the bike using the front mount points available on that bike (using the U-bolts, and the rear seat post):
https://epicsurfracks.com/products/e-bike-surfboard-rack-shortboard-longboard-sup?variant=40434293473485
As a rule of thumb: The larger the board the better it would be to mount the surf rack with the greatest distance between the front and rear of the bike, to provide optimal stability. -
Will the longboard rack fit on an Aventon Aventure eBike?+ Show Answer
Honestly, I don't think it will seamlessly mount up the Longboard version without either an additional luggage rack or some slight modification.
However, the Shorboard version should work with no issues.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.